Wetsuits are designed to provide insulation and protection against cold water temperatures, making them ideal for a variety of water-based activities. For activities such as surfing, diving, swimming, snorkeling, stand-up paddleboarding, kayaking and canoeing, it typically requires wearing a wetsuit to keep the body warm and comfortable.

The cost of a new wetsuit can range in price from around $50 for a basic, entry-level wetsuit to over $500 for a top-of-the-line wetsuit from a premium brand. For those who plan on engaging in water activities frequently, it is a worthwhile investment to purchase a high-quality wetsuit for comfort, warmth, and durability. However, a tube of wetsuit repair glue or wetsuit cement can be an affordable and reasonable solution should there be holes, tears and seams on the wetsuit.

Applying wetsuit glue can help repair tears, holes, or other damage to your wetsuit. Here are the steps to apply glue for repairing a wetsuit:

Clean the damaged area: Before applying glue, make sure the damaged area is clean and dry. Use a wetsuit cleaner to remove any dirt or debris and let it dry completely.

Apply the glue: Apply a small amount of wetsuit glue to the damaged area using the brush applicator that comes with the glue. Spread the glue evenly over the area, making sure to cover the edges of the tear or hole.

Let the glue dry: Allow the glue to dry completely according to the manufacturer’s instructions. It usually takes around 10-15 minutes for the glue to dry.

Apply a second coat: If necessary, apply a second coat of glue to ensure the repair is strong and durable. Let the second coat dry completely.

Test the repair: Once the glue is completely dry, test the repair by gently pulling on the edges of the damaged area. If the repair holds, you’re good to go!

Remember to always follow the manufacturer’s instructions when using wetsuit glue and wear protective gloves to avoid getting the glue on your skin.

Shin Dorn offers private label packaging for wetsuit repair glue products, neoprene cement for wetsuit repair. Please contact us today for more information: sales@shindorn.com

Related product:
Neoprene Glue for Wetsuit (19047)

The post Wetsuit Repair Glue Mends Holes, Tears and Seams appeared first on Shin Dorn USA.

Shin Dorn is a wholesale repair glue supplier, offering pvc adhesive for inflatable pin hole repair. Adhesive is filled in 3 ml to 60 ml aluminum collapsible tubes. Customized packaging and private label services are available. Low MOQ offering.

To manufacturers of PVC inflatable products, repair glue and repair kits are essential items for leak repair. Pinholes, rips and tears happen. Using a small tube of pvc adhesive can quickly seal pinhole leak. For rips and tears, an extra pvc patch will be needed to cover the damaged area.

PVC adhesive from Shin Dorn works for PVC inflatable boats, including inflatable pvc kayak, canoe, dinghy, fishing boat, Hypalon, kayak and raft. It is easy to fix pinhole leak with the adhesive glue. Here are steps to repair pinholes on leaky inflatable boats.

1. Locate the leak. Look for the pinhole that causes the leak. There might be more than one. Mark the pinhole(s) if necessary.
2. Roughen the surface around the pinhole so that the adhesive can adhere well later on. Do not over-do it though.
3. Wipe the leak area clean with isopropyl alcohol.
4. Apply the repair adhesive to cover around the pinhole. It takes one or two minutes for the adhesive to set. Wait at least 30 minutes before re-inflating.

It would be a good idea to have the inflatable pin hole repair solution ready in the packaging of the inflatable product. If you would like to customize pvc inflatable boat adhesive for your branding, Shin Dorn is the best supplier for you. Please contact Shin Dorn today for quotations: sales@shindorn.com

Related products:
Vinyl repair kit

The post PVC adhesive for inflatable pin hole repair appeared first on Shin Dorn USA.

Shin Dorn provides wholesale and customized self-adhesive repair patch kit for air mattress and air bed, made from durable repair material. Just peel and patch and have hassle free repair experiences. Shin Dorn is the ideal supplier that offers private label packaging for your branding.

When it comes to puncture repair for air mattress, there are two common methods. One can take a glue repair kit that consists of liquid adhesive and pieces of plain patches. Apply glue to the patch, and adhere the patch to the punctured area. The repair glue works great while some users might find it messy. The other way to fix puncture is to apply a self-adhesive patch. The pressure sensitive adhesive is durable and strong. Both of the repair kits are available from Shin Dorn. However, self-adhesive patch is recommended whenever simple and easy repair is desired. It repairs holes and tears. It seals well and can continue to maintain a tight seal even with repeated deflation and inflation.

Below are quick details regarding Shin Dorn’s air mattress repair patch kit.

What are the applications of this repair patch?

This see-through self-adhesive patch repairs not only air mattresses but also all sorts of inflatable products, including inflatable boats, inflatable pool liners, swimming rings, pool noodles and inflatable toys. It sticks to vinyl, plastic, canvas, tarps, nylon, polyester and leather. It also works for tents, boat covers, camper awnings, RV awnings, umbrellas and sunbrellas.

What’s special about this repair patch?

This patch is made from an elastomer that is waterproof, weatherproof, tough and elastic. 7 standard sizes available. Regular size is 3 inches wide, and length can be customized.

Sizes Available:

70 mm x 70 mm
75 mm x 75 mm
100 mm x 100 mm
3 inch x 5 inch
4 inch x 6 inch
75 mm x 3 m (rolls)
75 mm x 10 m (rolls)

Tips to apply the patch

Start with a clean, dirt free surface using an alcohol pad to wipe off dust and grease. Take the patch and measure the tear. The patch should extend 1 inch beyond all edges of the tear. Be sure to cut around the corners before applying it to repair area as corners tend to come up through time and affect durability. Patch and press firmly for a minute or two to force out any air bubbles so that the adhesive adheres tightly and the patch holds up through a long time. If it is an inflatable item to be patched, let it cure for 24 hours before re-inflating it or putting it back to water.

Shin Dorn offers standard and custom private label packaging for air mattress repair patch kit. As branded packaging reinforces your brand’s identity, Shin Dorn works with you to create unique product images and earn higher market share. Contact Shin Dorn for inquires: sales@shindorn.com

Related Products: Air mattress repair patch

The post Wholesale Repair Patch Kit for Air Mattress appeared first on Shin Dorn USA.

Inflatable pool is such a wonderful household item that it brings many joys to families, especially those having kids. Depending on size and style, a small-sized inflatable pool costs twenty to hundreds of bucks. We want it to hold up well for a long period of time, although we need to fix it using pool patch kits when a puncture is caused by accident at times. For example, the kitten claws a tear in it or you drag it on the ground and it got cut by something.

A pool patch kit can be used for do-it-yourself repairs. For those who do not have many experiences in repairing, it would be frustrating if a repair kit did not seem to do its job well after all the hassles of gluing and patching. To increase the odds of successful repairs, let’s look at the tips from people who have made it.

Tips for patching inflatable pool using repair glue:

– Be sure to clean the area that needs to be patched. Keep it dry and smooth without dust and dirt before applying adhesive and patch. Clean it with alcohol if necessary.

– It is strongly recommended that you use fine-grade sandpaper or a small pebble to sand down the area to be repaired. Roughen the fabric around the tear will help the glue to hold tightly.

– A repair kit comes with one or two pieces of vinyl for patching. Cut a piece for your damaged area and be sure to cut around the corner to make it rounded. Patches with corners tend to lift up afterwards.

– As the viscous glue contains solvent, it takes time for the solvent to volatilize. Once you apply glue on the patch, wait 30 seconds to 1 minute for the solvent to volatilize before sticking the patch onto the damaged area. This will speed up the curing process.

– Once you have done with gluing and patching, wait 24 hours before re-inflating if possible. The glue needs sufficient time to set and cure, especially under humid condition.

– A well-glued patch will hold up for months and even years. However, if the damaged area is on the spot where you would constantly drag against the ground, there is much chance it will rub off at some point. Should this happen, you need to make the repairs all over again.

Repairing rips and tears in pool liners should not be overwhelming. Keep in mind these tips and you can achieve satisfying results. Good luck! Contact Shin Dorn if you are interested in private label packaging of vinyl pool patch kits: sales@shindorn.com

Related product: Inflatable Pool Repair Kit (RK019)

The post How to Fix a Pool Using Pool Patch Kits appeared first on Shin Dorn USA.

Kids love playing with water in summertime. Who wouldn’t enjoy an afternoon break at the pool anyway? When it comes to having fun with water, an inflatable swimming pool will do in the backyard. However, it happens when pool liner gets puncture. It is possible to mend the puncture by oneself, either using repair glue or simply applying self-adhesive swimming pool patch. These self-adhesive patches are pre-glued with pressure sensitive adhesive (PSA) specially formulated for holding inflatable products.

One advantage of using self adhesive swimming pool patch is that no liquid adhesive is needed. Simply peel off the backing and stick the patch down on to the area to be repaired. A swimming pool patch works perfectly on fast set pools, inground swimming pools and above ground swimming pools. They also mend other inflatable items including airbed, spas, pool floats, as well as inflatable boats. (Reference: Choose Between Vinyl and TPU Tape )

Tips for Applying Swimming Pool Patch

How to mend rips and tears using self adhesive repair patches? Applying these patches is as easy as applying stickers, although some preparations are highly recommended. Below you can find the essential tips regarding applications of glueless repair patches.

– Although some repair patches are water resistant and can be used on moisture surface, it is suggested that you keep the damaged surface dry and clean to achieve the best results.

– Sand down the surface to be repaired if possible, using a piece of sandpaper or simply a small pebble. The roughened surface will allow the adhesive to hold tighter and longer.

– Once you have applied the patch, press firmly against the surface for a few minutes and force out any air bubbles trapped in the middle.

– The glueless patch can be used to mend the inflatable section of a fast set pool and can also repair a puncture in the water holding part. For extra protection, put one patch on the outside and another one on the inside.

– Allow at least 4 hours for the repair area to dry away from heat and humidity before you re-inflate and use the item again.

– You will need larger patches if you are dealing with bad cracks.

– It should be noted that these patches work well on smooth PVC and similar plastic materials. They would not work well if put on the velvet side of an inflatable item.

Learn to patch up punctures on inflatable products. It will extend the product’s life and save you money!

Shin Dorn offers self adhesive swimming pool patches that can be used in wet conditions. Private label manufacturing is available. Please contact Shin Dorn for more information.

Related product: Vinyl Pool Patch Kit (RP001)

The post Apply Swimming Pool Patch to Fix Inflatables Puncture appeared first on Shin Dorn USA.

It happens when your inflatable product gets punctured. Say, a pool float hit a rock and created a ragged slice along the side. You thought that it could no longer be used, but it doesn’t have to be so. Get a PVC repair kit, and patch the seams by yourself. It can seal the rips and tears quick and easy.

A PVC repair kit contains liquid vinyl adhesive and vinyl patch. As we are gluing a vinyl patch to a vinyl inflatable, the adhesive works to fuse the vinyl together. Follow the simple instructions and you can get back out on the water again.

How to repair inflatable products:

1. Deflate your inflatable and let out air in the float.
2. Measure the leaking seam and decide the size of patch so that the patch covers the seam nicely. For example, twice the size of the damaged area or larger. Don’t forget to cut round corners on patch.
3. Apply adhesive to the patch. Do not over apply. It will take longer for thick adhesive to fully set. One tip is to use a scraper or a toothpick to smooth out the adhesive.
4. Stick the patch to the damaged area, fully covering the seam. Make sure the borders of the patch and the corners are solidly secured. Press the patch over the seam and squeeze out all bubbles.
5. Leave the patch for at least 4 hours. It will get best result if allowed 2 days to fully cure.

PVC repair kit works on all kind of vinyl and plastic inflatable products, including waterbeds, air mattresses, pool noodles, pool liners, etc. A well mended inflatable will hold over a year and even longer with no problem. Why spend big bucks getting a new inflatable when you can save money by mending the pesky leaks in minutes?

Shin Dorn offers PRIVATE LABEL manufacturing of PVC repair kits. Products comply with EU and US regulations. Contact Shin Dorn for further details.

Related product: Vinyl Repair Kit (18119)

The post PVC Repair Kit Mends Your Favorite Inflatable Products appeared first on Shin Dorn USA.

If you are into water sports like swimming and boat rowing, you will be handling a variety of inflatable products. Inflatable boats, pool liners, pool floats and lounges, inflatable toys…. These items are amazing in a way they bring so much fun to us in summer time. They are commonly made of vinyl fabrics. Should there be puncture, rips or tears, it can be repaired by vinyl adhesive.

You will be surprised how easy it is to repair air leak of inflatable items using vinyl adhesive. It is not ordinary glue. It is much stronger than stationary glue on your desk. Vinyl adhesive can stick firmly onto the surface of a fully blown inflatable item. Its ingredients should be literally safe as many inflatable items are expected to be used by children. Further, vinyl adhesive is waterproof and will not be washed away in contact of water. This is why good quality vinyl adhesive can be applied underwater.

Whenever it is not possible to take inflatable item completely away from water, you can repair it below water. Here are simple steps to apply vinyl adhesive and make repairs in this condition.

1. Clean the surface to be patched. Wipe off dirt and dust if possible. Use a vinyl surface cleaner if possible.
2. Cut vinyl patch with rounded corners to prevent peeling. The patch should be larger than the area to be repaired.
3. Apply vinyl adhesive to patch. Spread adhesive evenly to cover the whole area.
4. Fold the patch onto itself temporarily. Locate the area to be repaired. Unfold the patch and apply it to the area right away.
5. Press firmly and carefully, forcing out all bubbles. Apply extra weight if possible to assist adhesion. Wait at least 12 hours for best curing and bonding results.

Shin Dorn offers vinyl adhesive that can be applied underwater. Custom tube packaging services are available with different sizes, from 3 gram to 60 gram. Contact Shin Dorn for further details today!

Related product: Inflatable Boat Repair Kit (19031)

The post Apply Vinyl Adhesive to Repair Underwater appeared first on Shin Dorn USA.

Lights are susceptible to damage from water, mold and bugs when installed in outdoor environment. When it comes to installing outdoor lights, it is suggested that the lights be properly caulked. Silicone caulking is commonly adopted to achieve this purpose. By caulking outdoor lights you could keep water from penetrating into the components. It also makes it harder for mold and bugs to enter the lights and cause damage.

Silicone sealant is an ideal caulking material that forms a waterproof, flexible and tough seal. It is moisture sensitive, which means it cures in contact with moisture. Once cured, it is resistant to water and remains flexible. The advantage of silicone caulking is that it will not crack or shrink over time.

Here are silicone caulking tips for outdoor lights.

1. To enhance the effectiveness of caulking, take a damp cloth and wipe the areas where you will be applying the caulk. Keep the areas clean and dry before you begin.
2. As the lights are set in place, determine your work area for caulking.
3. Punch the sealant tube open using the piercer on the screw cap. Make the opening larger if a larger size of caulking bead is desired. Squeeze the tube and apply a uniform bead of caulk to fully cover the seam/gap between the light and the back plate or between the light and the mounting board. Don’t worry if the caulk spills. Simply use a scraper to steer caulk around.
4. As you have finished, use a damp rag or your wet finger to smooth out the caulk, leaving a nice finish. Press down a bit so that the caulk will flow and fill the hidden and hard-to-reach areas to ensure a better caulking result.
5. Silicone caulk will become less spreadable in 30 minutes after applied. However, it takes 12 to 24 hours to fully cure.

Shin Dorn offers branded packaging of silicone sealant for caulking outdoor lights. Regular tubes are as small as 5 gram, 7 gram, 15 gram. Free sample tube are available for your evaluation. For further details, please feel free to contact Shin Dorn.

Related product: Silicone Seam Sealant (SK008)

The post Silicone Caulking Tips for Outdoor Lights appeared first on Shin Dorn USA.

Once you have acquired a new diving wetsuit, you want to keep it in good condition as long as possible. A quality wetsuit would cost no less than three hundred dollars. Whenever there are cuts and splits or with times stitches lose their strength, you might consider fixing it using wetsuit repair glue. Not having to replace it with a brand new wetsuit will save you big bucks. But how can one deal with the rips and tears?

In case there are cuts and splits in neoprene fabric, neoprene contact adhesive can be used for repair. Neoprene contact adhesive can usually be purchased at any good dive or surf shop or online. It is used for repairing wetsuits, dry suits, fishing waders, rubber boots and gloves. It is ideal for patching and bonding neoprene edge to edge, making repairs in just five minutes. Simply apply the repair glue to both edges of the neoprene fabric. When it feels touch dry, hold the edges together and press firmly for best results.

Follow the simple steps to apply wetsuit repair glue for neoprene fabric:

1. Wash the surfaces to be glued with clean water. Keep repair areas clean, dry and free of grease.
2. Apply a thin layer of glue to repair areas. Allow to dry for 5 to 10 minutes.
3. Apply another layer of glue. When it feels dry to touch, align and press firmly to join the edges together. Hold firmly in place for long lasting repairs.

Shin Dorn offers custom packaging of fast drying wetsuit repair glue that repairs, seals and waterproofs neoprene wetsuits. Glue is filled in aluminum collapsible tubes, with volume from 20 gram to 60 gram. Custom packaging is offered for your branding. For free sample evaluation, please contact Shin Dorn today: E-MAIL for Wetsuit Repair Glue.

Related product: Neoprene Glue for Wetsuit (19047)

The post How to Use Neoprene Wetsuit Repair Glue appeared first on Shin Dorn USA.

As the summer is coming, it is time to take out your inflatable pool and set it up in the backyard. Before throwing a kids party, however, you might want to check out the condition of the pool liner and make sure it works as well as it did last year. What if there is leakage? If you still keep the self adhesive patch included in the product package, it would be of your instant help. Otherwise you can buy a vinyl adhesive patch kit at local pool shop.

A vinyl adhesive patch is pre-glued with pressure sensitive adhesive and can be used to patch the hole directly without having to apply any extra liquid glue. The main advantage of adhesive patch over a glue-and-patch kit is that the former provides a quick repair – Your pool liner can be re-used in less than one hour after repairs.

Below are the simple steps to patch a pool liner using vinyl adhesive patch.

1. Measure the damaged area and cut the patch in size that is at least an inch wider on all sides to properly cover the hole. (Do not peel off the backing paper at this step.)
2. Make the cut always round or oval and leave no jagged edges so that there are no sharp pointed edges to come off in the future.
3. Clean the damaged area and keep it dry.
4. Peel off the backing paper and place the adhesive patch on the hole, fully covering the damaged area. Press the patch down firmly from the center out, pushing out all bubbles.
5. Wait at least 30 minutes before re-using the pool liner. It takes 4 hours for the adhesive to fully cure.

Shin Dorn offers vinyl adhesive patches for repairing PVC pool liner and inflatable products. Regular patch sizes include 3 inch diameter, 60mmx60mm, 70mmx70mm, 3 inch x 7 inch and more. For detailed information, please contact Shin Dorn: E-mail now!

Related product: Glueless PVC Repair Patch (RP631)

The post How to Use Vinyl Adhesive Patch to Fix a Pool Liner appeared first on Shin Dorn USA.